32LikesThread: 1929 Essex Highboy
Results 1 to 15 of 303
LinkBack URL
About LinkBacksThreaded View
-
08-28-2011 03:56 PM #16
CHR Member/Contributor
- Join Date
- Jul 2007
- Location
- Ellsworth
- Car Year, Make, Model: 29 Essex RS Coupe
- Posts
- 377
Little More
Here I have taken the body off of the chassis and have it standing on it's head (again). I need to weld up the bottom of the sub floor framing. Also, I mentioned before that I needed a clutch operator. This is a pull type slave that I got from Speedway. I have made a bracket from a piece of 1 1/2" angle iron, notched it to fit beside and under a section of the K/H member. After determining where it needs to be, I sanded off the silver paint and welded it on. The slave cylinder moves about an inch, which I am told should be enough to disengage the clutch.
More as I can. perleyToo old to work, Too poor to quit. 
My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Friday and Saturday (4/11 & 12/25) Chris (my wife) and I made the journey to Homestead-Miami Speedway so I could participate in the Florida Power & Light sponsored Electrathon event.:cool: It was...
Electrathon - A Different Kind of...