Ya Dave; I'm feeling ok still get short breathed.
The weather has been mild here lately, so the RA ain't messin with me either.
Got a bunch of the steel measured and cut, then me last stainless steel chopsaw blade
broke or split. I actully got alot of use out of that blade, cut all the steel for my burgler bars on my house with it a while back. The only reason it broke, is because it's sunday
and the welding shop I get the blade's from is closed.
My neighbor came over and wanted me to make him a spacer out of a 2X6.
Would have been so easy if it was a 4V, but it's some hopped up fuel injection intake
with 8 - 1 5/8 hole's one other hole in the middle of those, then all the bolt holes to bolt it down. It goes in between a the upper and lower piece's of the intake.
Came out real nice, had to be careful the ports are real close together.
Only about a 1/8 in. in between the ports, So I kept busy anyway. Kurt