Thread: 66 mustang brakes

Tweet

I have a 66 Mustang with the old drum brakes still on it, and I want to swap to rotors. What will swap over to this?
THANKS

Cheapest route is a Granada swap . You will have to use a 70 Mustang outer tie rod end to fit the Granada spindle . The aftermarket has swaps made up but quite pricey.

thanks, What years will work off the Granada?

75 to 80 Granada are ideal for front disc brake set-ups for the swap over. You will need the spindles, disc's, calipers, and dust shields. You'll need to replace the original Mustang outer tie-rods with ones from a Granada of the same year. Your going to also need a dual chamber master cylinder and either a proportioing valve or combo valve and of course a few new brake lines.

Below are some websites that should tell you everything you want to know, plus the bottom sites have ready to install kits for sale, but are pricey.

http://www.mustangsteve.com/granadadiscs.html

http://www.midnightdsigns.com/james/Disc%20Brakes.htm

http://www.vintage-mustang.com/topic...rumtodisk.html

http://www.discbrakeswap.com/

http://www.chockostangclassicmustang.com/

Thanks for the help guys.