Thread: AN fittings
Results 1 to 8 of 8
LinkBack URL
About LinkBacksHybrid View
-
05-11-2009 03:45 PM #1
CHR Member
- Join Date
- Sep 2007
- Location
- UPSTATE New York
- Posts
- 4,336
I'd be surprised if the fuel pump is a straight thread - any that I've seen, mechanical or electric, regardless of the brand are pipe. If they are pipe, then you can use Teflon tape. If it's an adapter fitting to the pump, pipe to -AN then all bets are off as you should not use Teflon tape (but, then I have and for that very reason of coming loose
)
Dave W
I am now gone from this forum for now - finally have pulled the plug
-
05-11-2009 08:32 PM #2
CHR Member
- Join Date
- Nov 2008
- Location
- Westminster
- Car Year, Make, Model: 60 Corvette
- Posts
- 57
Well the inlet is a straight thread with a copper washer, I tried different size pipe thread adapters, it's not a pipe thread...........
Originally Posted by IC2
I'd be surprised if the fuel pump is a straight thread - any that I've seen, mechanical or electric, regardless of the brand are pipe. If they are pipe, then you can use Teflon tape. If it's an adapter fitting to the pump, pipe to -AN then all bets are off as you should not use Teflon tape (but, then I have and for that very reason of coming loose)60 Vette 350 5speed not much stock. 
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I wore a camouflage T-shirt once. The response in the pub was "Oooh, it's a floating head!" .
the Official CHR joke page duel