Thread: disc brakes + power steering
-
05-16-2009 04:50 PM #1
disc brakes + power steering
Here is my battle plan. I have a 51 Ford Vic. I want to put Disc brakes and power steering on. Plan A, Rotors from a 78 Montecarlo for the front. These will fit the stock spindals. 87 Caddy Eld. they will, bolt on the stock
rear end. Now I still have to search out a steering deal, or go to plan B. which is take all the stuff steering brakes ect off a S10 and put it on the 51 rails. Question, If I go to plan B and the S10 install measures the same on the 51 as it did on the S10 truck, do I have a problem. you know one of those "oops I did'nt think about that" I am aware that I will have to trim the 51 rails, and will more than likely have to have the bumpsteer if I get any corrected. Thank's
John W burns
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-16-2009 06:02 PM #2
How's about a new IFS front suspension made for the '51???? Then you get disc brakes, power rack and pinion steering, and coilovers. All brand new parts as opposed to a bunch of used stuff that probably needs rebuilding.....no geometry problems, either.....Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance