Results 1 to 15 of 17
LinkBack URL
About LinkBacksHybrid View
-
06-09-2009 08:47 AM #1
CHR Member
- Join Date
- Sep 2007
- Location
- UPSTATE New York
- Posts
- 4,336
I spot face as well but I also use medium strength Loc-Tite too. The set screws and lock nuts provided by Borgeson, and probably the others - the screw is way too long and one hit the header and that skinny nut - less then a great way to fasten the screw. I can assure you with bloody and scarred knuckles that this arrangement is tight after having to disassemble my upper u-joint to remove the column for repaint.Dave W
I am now gone from this forum for now - finally have pulled the plug
-
06-09-2009 09:03 AM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,891
Since these threads are often used as reference without commentary it pays for us to try to cover, whenever possible, unexpected situations/experiences/etc. Here's Borgesons commentary on welding of U-joints; http://www.borgeson.com/DESIGN/STEERING%20DESIGN8.htmlYour Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?