Thread: Tube axle front end
Results 1 to 8 of 8
LinkBack URL
About LinkBacks-
07-01-2009 05:35 PM #1
CHR Member
- Join Date
- Jul 2004
- Location
- PCB
- Car Year, Make, Model: 40 Ford Coupe Convertible
- Posts
- 222
Tube axle front end
How do you adjust a chrome front tube axle? I just put new tires on and have about 1200 miles and the out side on the tires are worn out already. Some one said heat and bend it. I think that would ruin the chrome? Thanks for the help!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-01-2009 06:38 PM #2
CHR Member
- Join Date
- Jan 2004
- Location
- Santa Ana
- Car Year, Make, Model: '32 High Boy, '60 VW, Teardrop Trailers
- Posts
- 355
Always "Think about the easy things first". Have you checked and set the toe in?
Originally Posted by Steel Warrior
You can change the camber by bending the axle on a front end rack "if necessary". Changing the caster depends on how the system was originally built.
-
07-01-2009 07:32 PM #3
CHR Member
- Join Date
- Jul 2004
- Location
- PCB
- Car Year, Make, Model: 40 Ford Coupe Convertible
- Posts
- 222
Never thought to check toe in. Didn't think that would wear the outer edge of the tires. Thanks will check that ASAP. Also check to see if there is a good front end shop near by. Someone that knows about tube axles.
-
07-01-2009 08:25 PM #4
CHR Member
- Join Date
- Feb 2006
- Location
- Bartlett
- Posts
- 6,831
Do you have the right spindles on it??there are spindles of different angles from those years that can be mixed up
You probably have too much castor and toed out which will wear outside of tiresLast edited by jerry clayton; 07-01-2009 at 08:28 PM.
-
07-02-2009 12:06 PM #5
CHR Member
- Join Date
- Jul 2004
- Location
- PCB
- Car Year, Make, Model: 40 Ford Coupe Convertible
- Posts
- 222
Don't know what spindles are that's on it. Or if they are the right ones. Someone else put it together(what a Laugh). So I'm out on a limb here. All I know is that it takes a GM rotor and caliper. Had to replace all that too. Sorry, it took so long getting back. Ordered a long block ( because the motor was such a great one and ran so great) ,(another laugh)started putting it in and had to pull it because it had 2 different heads on it. Great quality control? Not been a good 5 days!
-
07-02-2009 12:32 PM #6
CHR Member
- Join Date
- May 2003
- Location
- whittier ca.
- Car Year, Make, Model: 32ford5w,60fordstarliner,55chevy65corvai
- Posts
- 645
sorry jerry but toed out wears the inside toed in wears the outside ....tedI'LL KEEP MY PROPERTY, MY MONEY, MY FREEDOM, AND MY GUNS, AND YOU CAN KEEP THE CHANGE------ THE PROBLEM WITH LIBERALISM IS SOONER OR LATER YOU RUN OUT OF OTHER PEOPLES MONEY margaret thacher 1984
-
07-02-2009 01:27 PM #7
CHR Member
- Join Date
- Oct 2003
- Location
- ST.LOUIS
- Car Year, Make, Model: 31 FORD 5 WINDOW,69 442, 305 sprint car,
- Posts
- 1,410
Wrong Toe will wear tires faster than camber ever will and castor unless in an extreme case will not cause tire wear. Originally Posted by Steel Warrior
-
07-02-2009 09:33 PM #8
CHR Member
- Join Date
- Jul 2004
- Location
- PCB
- Car Year, Make, Model: 40 Ford Coupe Convertible
- Posts
- 222
Thanks, I will check that toe ASAP! Sorry for the delay. Put a long block in and found out after install. That it was bad, so had to pull it and have them ship another one. Just not enough hours in a day! Thanks for the help!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
A "skip" = a dumpster.... but he says it's proper english??? Oh.. Okay. Most of us can see the dating site pun, "matching" with an arsonist.. But a "SKIP? How is that a box? It must all be...
the Official CHR joke page duel