Thread: Fuel Problem

Tweet

Tomorrow I will try to move the metal line a few inches from the intake manifold and valve cover. It that doesn't work, I will try to eliminate the rubber hose from the tank to the pump or at the very least reduce the length of hose as much as possible. I didn't think the hose would colapse unless the pickup tube was blocked or clogged. Thank you guys for the suggestions.

Teddy

Fuel problem solved!!! The problem was two fold. The fuel tank vent line was crimped and the fuel filter inlet between the tank and electric fuel pump was partially clogged. It is one of those glass filters that can be opened and the filter cartiridge can be cleaned or replaced. I had been opening the filter to clean it but I was'nt removing the inlet section of the filter and couldn't see that it was clogged. I guess this is an example of over looking the simple things. The good news, is that the problem encourged me to to relocate the electric fuel pump to a better position in relation to the tank and short the hoses. All is good once again. Thanks for the help.

Teddy

Now, install a regulator to bring the pressure at the carb inlet down to 5 psi and you'll be golden. More pressure will not make more hp, it'll only over-ride the needle and seat, blow raw fuel into the intake and give you tuning headaches. Ask me how I know.