Thread: steering joints
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
09-11-2009 11:01 PM #1
CHR Member
- Join Date
- Nov 2005
- Location
- Phoenix
- Car Year, Make, Model: 1937 Caddy LaSalle, 66 Lone Star Cobra
- Posts
- 227
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-11-2009 11:07 PM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
you should spot were the set screws are with a spade drill in to the shaft then use a thread locker on setsIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
09-12-2009 12:13 PM #3
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Just so you know in case you plan to make a pass at Firebird.....
2009 NHRA Rulebook:
General Regulations 3.3, Steering....
".....All fasteners must be of a positive nature; no roll or pressed pins, no ball lock pins, set screws, etc."
We require all joints to be equipped with through-bolts and nuts on all connections except the pinion shaft of the R&P (either that or welded 360). The pinion shaft connection is allowed a set screw with locking nut.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird