Thread: Rearview mirror mounting button
-
11-29-2009 10:17 AM #1
Rearview mirror mounting button
Sorry if this is a stupid question. I have a 2006 Honda Ridgeline and I want to remove the rearview mirror mounting button from the windshield. I thought about heating it but was afraid I would trash the windshield. I assume this is glued on like most vehicles. Anyone have any ideas on safely removing this device?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-29-2009 10:52 AM #2
I would not heat it because you could crack the whole windsheild. Try some acetone with some q-tips.Friends dont let friends drive fords!
-
11-29-2009 12:25 PM #3
Teddy, find a windshield replacement company near you, ask them what they use when they replace one.
Mike
-
11-29-2009 04:09 PM #4
Thanks guys!
-
11-30-2009 02:31 PM #5
-
11-30-2009 02:50 PM #6
I've seen several references to applying heat with a hair dryer or a heat gun on low setting while gripping the base with pliers, applying a slight twisting motion. No open flame - too much heat too fast. Acetone is also mentioned as an alternative, and that is the "special solvent" they sell in the auto departments - paper towel below, acetone above to let it seep into the joint like penetrating oil.Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
11-30-2009 03:04 PM #7
I think I'll try the heat gun set at low first. If that doesn't work, I'll try the acetone. I hate to use acetone because it can really mess up the dash if it happens to drip. I'll cover everything real good if it come to that.
This is a Honda Ridgeline and I assume it is glued on.
thanks guys.
Guy goes to a sex shop to buy an inflatable doll. Gets asked if he wants a regular one or a Muslim one. He asks what the difference is. The Muslim one blows itself up. .
the Official CHR joke page duel