Thread: Parts Washer

Tweet

Thanks guys, it sounds like mineral spirits is the best choice for me. Now I need to go shopping at the local paint suppliers. Pat, thanks for the tip on the pump - mine is in an enclosure to the side that has a mesh & paper filter, and the pump inlet is maybe an inch off the bottom of the sink. Should be good for some sediment room.

I made my own washer, and put the pump 6" off the bottom. 4" of water, then Varsol. The heavy crud sinks in the water and keeps the Varsol clean. Drain it once a year.

Originally Posted by R Pope

I made my own washer, and put the pump 6" off the bottom. 4" of water, then Varsol. The heavy crud sinks in the water and keeps the Varsol clean. Drain it once a year.

Got any pics and/or parts list for the washer you made? I have been thinking of purchasing one, but I would prefer to make my own if it is possible.

The pump was out of a wringer-type washing machine, lots of luck finding one of those now! The reservoir was just a barrel, today I'd use a plastic one. A big kitchen sink and some metal flex hose and you're in business. It's built in to the end of my shop bench, doesn't get used as much as I thought. The local car wash is just too convenient!

Originally Posted by R Pope

The pump was out of a wringer-type washing machine, lots of luck finding one of those now! The reservoir was just a barrel, today I'd use a plastic one. A big kitchen sink and some metal flex hose and you're in business. It's built in to the end of my shop bench, doesn't get used as much as I thought. The local car wash is just too convenient!

Thanks. Yeah, wringer washer pumps are probably as rare as deuce coupes. I'll have to do a bit more research to see if it is feasible to make one.