Results 1 to 1 of 1
LinkBack URL
About LinkBacks-
02-19-2010 08:25 PM #1
CHR Member
- Join Date
- Apr 2004
- Location
- Little Elm
- Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
- Posts
- 3,890
'93 Corvette primary cooling fan.
The primary fan on my '93 Vette shelled, and I bought a used one from a salvage yard (Dino's). My problem is removing the old fan. My Hanes manual says to simply remove the four screws holding the shroud in place, disconnect the plug, and lift it out.
Unfortunately, there's a crossmember right behind the fan, and it cannot be pulled back far enough to remove it.
Help. Anyone?
NEVER MIND. i FIGURED IT OUT. Loosen all of the radiator shroud bolts, disconnect radiator hose, insert 2x4 between radiator shroud and engine block, apply heavy pressure with right hand, curse loudly, pull fan out with left hand.
Installation is the reverse of removal . . . at least Hanes had that right.Last edited by Henry Rifle; 02-19-2010 at 11:02 PM.
Jack
Gone to Texas
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird