Thread: A/C Problem
-
03-09-2010 12:03 PM #1
A/C Problem
If you move switch on the dash to heat the heat comes on,
but if you move the switch back to A/C it won't work.
So you have to reach under the dash and pull the rod
on the diaphram or accuator on the left then the A/C
will work again. Would this be a bad diapham or would
the contrller or the head be bad.
I am no A/C tec by far so I am guessing here.
This is on a old 83 Dodge pick up.
Thanks for any help.
Kurt
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-11-2010 02:45 PM #2
check your vacuum supply to the control head, then pull check with a vacuum gauge to see if vacuum is going to the actuator when it is commanded to
-
03-11-2010 03:42 PM #3
Hey, I'm an "expert" on A/C...when it's hot, roll the windows down when you dirive, when it's really hot, drive faster!!!! When it's Florida hot, stay in the shop and turn the A/C on!!!!! Simple huh? Told ya I was an expert, Kurt!!!!!!!!Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-11-2010 05:31 PM #4
Thanks moter I've got to check it out.
Dave; I didn't think T - Buckets had roll down windows.
HE! HE! HE!
KurtLast edited by vara4; 03-11-2010 at 05:38 PM.
-
03-11-2010 09:36 PM #5
Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-12-2010 03:22 PM #6
HE! HE! HE! ok Dave.
It was the heads we have one on it's way.
Thanks guys. Kurt
Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
We Lost a Good One