Thread: 3 wire GM Alternater
-
09-29-2010 05:40 PM #1
3 wire GM Alternater
I don't want to sound dumb but her goes. I have a 3 wire GM alt, I know the one wire goes to the battery and the 2 pin plug one goes to the Horn relay and the other one is for the idiot light. here's my question, if I do not have an idiot light what do I do with that wire ? I have looked on the internet but have not forund the awnser, so I came to the place that can give me the awnser.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-30-2010 12:38 AM #2
I believe one wire goes to your ignition switch run side to turn on the voltage regulator and the other goes to the idiot light. If you aren't using the idiot light remove it from the plug.
Keith
-
09-30-2010 06:10 AM #3
Here's a good write up: http://www.madelectrical.com/electri...evymain1.shtml along with an even simpler sketch below. If you don't have the alternator plug, they are available at most good auto parts stores for 3-4 bucks.Dave W
I am now gone from this forum for now - finally have pulled the plug
-
10-05-2010 05:02 PM #4
Thanks for the info. IC2 that was a good link to read. Thanks
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance