Welcome to Club Hot Rod! The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.

» Members from all over the US and the world!
» Help from all over the world for your questions
» Build logs for you and all members
» Blogs
» Image Gallery
» Many thousands of members and hundreds of thousands of posts!

YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show

Thread: Engine experts........need your help again !

       Tweet


submit

Results 1 to 15 of 25

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

Itoldyouso Engine experts........need... 05-30-2011, 07:35 PM

Itoldyouso Ok, here are pictures of the... 05-30-2011, 07:38 PM

Itoldyouso And finally, here is the... 05-30-2011, 07:41 PM

sbcguy When I used to build engines... 05-30-2011, 07:58 PM

techinspector1 Don, I wrote this several... 05-30-2011, 08:05 PM

jerry clayton looks like a decent imprint... 05-30-2011, 08:10 PM

Itoldyouso Thanks sbcguy and Richard,... 05-30-2011, 09:02 PM

pat mccarthy take a long board with 80 git... 05-31-2011, 02:02 AM

Itoldyouso I think you are right about... 05-31-2011, 05:55 AM

sbcguy If the machine shop can... 05-31-2011, 10:06 AM

pat mccarthy it has to be more then .002... 05-31-2011, 06:28 AM

jerry clayton What kind /type of valve... 05-31-2011, 07:19 AM

jerry clayton Its a little more complicated... 05-31-2011, 10:26 AM

sbcguy Yep it is. The same cutter is... 05-31-2011, 10:34 AM

jerry clayton Yep, awhile ago--like last... 05-31-2011, 12:04 PM

Itoldyouso Thanks to all of you for such... 05-31-2011, 04:05 PM

Itoldyouso A little update. Last night... 06-01-2011, 11:24 PM

Itoldyouso Well, it looks like our... 06-03-2011, 11:07 PM

jerry clayton Don One other thing---what... 06-04-2011, 06:09 AM

Itoldyouso Jerry, we had only a breather... 06-04-2011, 06:18 AM

jerry clayton The piston weight needs to be... 06-04-2011, 06:24 AM

Itoldyouso What do you think of the... 06-04-2011, 06:29 AM

jerry clayton I like the teflon... 06-04-2011, 07:17 AM

Itoldyouso Good advice on the Perfect... 06-04-2011, 07:32 AM

pat mccarthy i like the PC hi temp viton... 06-05-2011, 04:35 PM

05-30-2011 08:10 PM #6

jerry clayton
CHR Member

Join Date

Feb 2006

Location

Bartlett

Posts

6,831

looks like a decent imprint on the gasket---how are the valve stem seals on the 1 and 3 intakes??? and guide clearances????
I wouldn't put the heads back on without checking the guides and seals

Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

New Forum Posts
- Looks Factory!!
  
  1968 Plymouth Valiant 1st Gen HEMI
  
  Yesterday, 05:28 PM
- We managed to get a couple of other small things taken care of. One was blacking out the front of the core support. When the sun hit the front of the car just right that green paint on the core...
  
  1968 Plymouth Valiant 1st Gen HEMI
  
  Yesterday, 03:51 PM
- Mike's 34 40... RIP my friend. -
  
  We Lost a Good One
  
  Yesterday, 03:18 PM
- I didn't know him but followed his posts. True hotrodder, he will be missed. RIP 34_40 MIKE. Condolence to the Mrs. Nolan
  
  We Lost a Good One
  
  Yesterday, 11:24 AM
- So sad, sorry to hear it.
  
  We Lost a Good One
  
  Yesterday, 09:21 AM
Everywhere sidebar 1.4.1

Powered by vBulletin™ Version 4.1.3
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
Tabs System by vbSoporte - vBulletin en Español
vBulletin Styles developed by vBStyles.com

All material found at Club Hot Rod are copyright protected

Links monetized by VigLink