Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree1Likes
  • 1 Post By pat mccarthy

Thread: Rochester 2G accelerator pump problem
          
   
   

Results 1 to 10 of 10

Threaded View

  1. 09-08-2011 01:27 PM #7
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    if your busting the plastic body off push rod then some thing is bottoming out . if nick in the bore you would just cut the seal .so it taking to much pressure to work the pump .like bad check ball or junk .the plastic one may not be as good as a metal body one still should not fail many of them carbs have used that plastic body on pumps
    Last edited by pat mccarthy; 09-08-2011 at 01:35 PM.
    cffisher likes this.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink