Kurt..........I have a Wilwood PV inline on my car and the fittings are 1/8" NPT and 3/16" line.There is nothing new you have to know if you have a proportioning valve in the system when it comes to bleeding .
I have a PV inline about midway going to the rear lines. I made a mark on the knob and counted how many turns to open and close,then opened it half way. There's nothing else to do except get it plumbed in and fittings tight. You make the adjustments after the brakes are bled and the car is running. You adjust so the fronts grab sooner than the rears.
There can be some different size lines coming from the master cyl. which can throw you off. I have seen 3/16" line and 1/4" line coming from one or the other at the MC.
Usually the larger line is for the disc barkes as they need more volume than drums. The front bowl on the MC is the rear brakes so you know which line is which.