2LikesThread: nomad lower quarters rust
Results 1 to 15 of 23
LinkBack URL
About LinkBacksHybrid View
-
10-12-2012 06:38 PM #1
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
butt weld is the only way i done most all rust work .hammer weld . wish i could say i never fixed rust
i never used a flage jointed on any thing never cared for the hi point they can rise by the step . i over lap some stuff but no more then 1/4 lap . if you do over lap water and dirt can lay in the joint . take your time fit up is key . tune in the welder so you do not pile alot of weld on the joint . warping can happen from grinding you weld joint down as well
Last edited by pat mccarthy; 10-12-2012 at 06:42 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
You're welcome Mike, glad it worked out for you. Roger, it's taken a few years but my inventory of excess parts has shrunk a fair bit from 1 1/2 garage stalls to about an eight by eight space. ...
1968 Plymouth Valiant 1st Gen HEMI