Thread: Electric Life Shaved Door Kit
-
11-01-2012 04:06 AM #1
Electric Life Shaved Door Kit
Hello Everyone Hope All Are Well here and up North!! I would like to know if anyone has every put in the Electric Life shaved door handle kit. The control unit is a G-20 with two remote controls. I just put a set in my 1929 ford coupe and was wanting to wire in the driver side window with this system. The wiring diagram that comes with this system is really lacking in detail. Has anyone got a diagram that I can get or know where I can get one? have the door solenoid working great with the remote controls but I don't know how to wire in the power window!!! Thank's
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-01-2012 05:51 AM #2
Have you checked their website to see if there is more information there? Might also want to check Dakota Digital's site, used to be lots of information there.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
11-01-2012 06:23 AM #3
I did check electric lifes website and could not find anything. I will try D/D, I don't know if there wiring would be the same as electric life.
-
11-01-2012 06:31 AM #4
Well, it requires a relay to run the windows off your remote box. it will take a signal from your remote off one the remote function wires to trigger the relay, then just wire in the relay in the normal manner. Dakota Digital has that information.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
11-01-2012 07:40 AM #5
I always start with the seller's tech line, since they have likely dealt with just about every problem you can imagine. Electric Life appears to support direct phone contact 9am to 4pm CST, provided you have your proof of purchase information. That's where I'd start.Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
11-02-2012 07:05 AM #6
Agreed. Always check with the manufacturer first. Systems differ, and what would work for one may not work with another.
Lynn
'32 3W
There's no 12 step program for stupid!
http://photo.net/photos/Lynn%20Johanson
-
11-03-2012 07:32 AM #7
I've done a couple. Do you have the 6channell kit? And, so far, doing just the right & left doors?
Whose window kit? That is what we need to know. Some are 5 and some 6 wire
I wanted to complain about this NZ slang business, but I see it was resolved before it mattered. LOL..
the Official CHR joke page duel