Thread: idle issues
-
02-25-2014 04:45 PM #1
idle issues
i was hoping to get some advice..i have a 95 tahoe with a tbi 350...started off with the idle shooting up and down where is was pushing the truck at a stop...i checked for vaccum leaks found none...i changed the tps and fixed the up and down issue but now the truck idles at 1500 rpm's...i took out the iac sencor and cleaned it up but no difference...disconnected the battery in hopes of resetting it but same situation...any help would be appreciated
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-25-2014 05:10 PM #2
Welcome to CHR!! Have you checked for OBDII Codes?Last edited by rspears; 02-25-2014 at 05:43 PM.
Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
02-25-2014 05:22 PM #3
Even though you've cleaned it, the IAC may be shot - they're about 40-50 bucks and may be worth a try. Also consider the coolant temperature sensor (CTS) as if they stick the computer thinks the engine is still cold. Does the vehicle seem to run rich? If so, I'd look to replace the CTS (+/- $15.00)."Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil
-
02-25-2014 06:53 PM #4
Have someone run a code check even if there is no check engine light on. Some auto parts stores will do it for you. (Auto Zone is one)Charlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
02-26-2014 07:23 AM #5
The flimsy gasket under the t.b.i. are known for causing that problemI'LL KEEP MY PROPERTY, MY MONEY, MY FREEDOM, AND MY GUNS, AND YOU CAN KEEP THE CHANGE------ THE PROBLEM WITH LIBERALISM IS SOONER OR LATER YOU RUN OUT OF OTHER PEOPLES MONEY margaret thacher 1984
-
02-26-2014 09:07 AM #6
IIRC the tps has a slotted mounting and you set it with an ohm meter?? anyway, you probably have it on where its keeping the throttle blade from closing---
I wanted to complain about this NZ slang business, but I see it was resolved before it mattered. LOL..
the Official CHR joke page duel