Results 1 to 1 of 1
Threaded View
-
09-07-2015 10:29 AM #1
Tilton Hydraulic Throw-Out Bearing With Centerforce-II Clutch Fitment
I would like to know if anyone out there has ever used a Tilton Hydraulic Throw-Out with a Centerforce-II clutch which has the counter weights on it and if so does it fit and work without any problems. I have a 1950 Ford Coupe with a built 357 Windsor engine with a Borg-Warner T5 trans and want to change to a hydraulic throw-out bearing. On the Centerforce-II clutch the ID. of the weights are (3.50") and the OD. of the Tilton bearing is (3.03") and that would leave (.235") clearance all around the new bearing.
It was SWMBO's little dog. .
the Official CHR joke page duel