I think the rack you're probably looking for is the 80s (?) Thunderbird rack. As I recall their rated for higher pressure, but still designed for lower pressure than the standard GM pump puts out. They are close in dimensions to the original Mustang II racks but require offset mounting bushings to get the mounting bolts to line up with the frame holes.

The most common methods for pressure reduction on the Saginaw pumps are restrictors or custom pumps which a lot of guys use with varying degrees of success.

Techs right about mounting a ford pump that's correct for the rack used, but due to the length of the Ford Pumps that might not be a viable option.....but you never know until you give it a shot, of at least a good loot at it.



.