Thread: Leaf Springs, Question
-
07-29-2004 06:19 PM #1
Leaf Springs, Question
I got a 39 Chevy Sedan an I bought C. E. rear leaf springs. I don't see no way to make the springs parallel front to back without
the bracket hanging off at least 1 1/2 '' per side. Is this normal or do I have another problem. Do they have to be parallel front to rear.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-29-2004 07:07 PM #2
Leaf springs do not have to be parallel to each other. A lot of vehicles come from the factory that way.
The frame I am working on now is a 48 chev trk & the frame is wider at the rear spring hanger than the front hanger.
Good luck !Don Meyer, PhD-Mech Engr(48 GMC Trk/chopped/cab extended/caddy fins & a GM converted Rolls Royce Silver Shadow).
-
07-29-2004 07:19 PM #3
Thanks, Don
-
07-29-2004 08:21 PM #4
While Don is absolutely correct, if it were me I'd call CE and double check.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
And a Happy Birthday Wish for Mr. Spears. Hope you can have a great one. :)
A little bird