Well, I have gotten a few things done on the computer the past week or so. I had to rebuild my big computer at and lost a lot of data in the process. I think it was a good thing though as I found a few more mistakes on my part...
After a big hiccup with geometry points earlier this year I have finally gotten the data where it needs to be. After plotting all of my spindle points from the actual parts I found my first design wasn't as far off as I had thought. It was off but only by 1/4" or so and not the 2" I had previously thought. I spent the last couple of days verifying my points are correct and redesigning the upper and lower control arms.
Here are a few pics of my 3D Data.
http://images19.fotki.com/v26/photos...rtsusp2-vi.jpg
http://images16.fotki.com/v31/photos...rtsusp3-vi.jpg
http://images19.fotki.com/v353/photo...rtsusp4-vi.jpg
Everything looks good right now. I need to rebuild the motion file to check clearances but this suspension isn't far off from the original so I'm not real concerned...
I also need to rebuild the front cradle and rear frame but those are pretty straight forward now that the front is complete.
Thanks for looking,
Mark