Isn't that the truth! Thanks Dave!

We got a lot done today although, like Dave says, it doesn't look like it. I spent two days cleaning out all of the old sheetmetal to make room for the new tires... Couldn't believe it. TWO DAYS!
Both sides are opened up now so I can actually get back to building...
http://images61.fotki.com/v777/photo...MVC015F-vi.jpg
I still have a lot of work to do to get the new tubs fit in but we'll get there. All of the dirty work is done so this next step is fun.
http://images12.fotki.com/v20/photos...MVC018F-vi.jpg
Here is a pic of the drivers side tire at ride hgt.
http://images51.fotki.com/v628/photo...MVC003F-vi.jpg
Mel got the floor patch almost ready. He made the end plates and got everything fit up and clamped
http://images16.fotki.com/v382/photo...MVC008F-vi.jpg
After the fit up.
http://images57.fotki.com/v300/photo...MVC013F-vi.jpg
A lot of work here also.
http://images61.fotki.com/v384/photo...MVC014F-vi.jpg
This piece will get welded back into the floor and that original crossmember will give me a place to hang mufflers and stuff.
http://images12.fotki.com/v335/photo...MVC020F-vi.jpg
We still need to get it set into the floor so we can mark it for the K member notches. Lots to do, so little time...
Thanks for looking
Mark