Thread: Bad Ast Astro Van Build

Tweet

Originally Posted by astroracer

Hi Pat, Hi Dave,
The alt bracket was designed to keep it low on the engine so it will clear the passenger side floor and engine cover. I looked at pulling it in closer to the engine but, if it was any closer, then you start running into the lower water pump outlet. I couldn't pull it up because of the mounting bracket itself.
Thanks
Mark

yes i know you need it to work the way you have it but i was looking at the bracket to work closer to the water pump . more close to the top of the head next to the upper part of pump .if you had the print i could have it cut out for my use or i just lay one out like i have with cardboad

Let me look at the bracket tonight. It may work if it is turned upside down with the adjuster at the top. It will probably be real close to the pump outlet but it may fit. If it does I may run it like that.
If it works like that, and you can use it as is, I can have a set laser cut for you.
Mark

Originally Posted by astroracer

Let me look at the bracket tonight. It may work if it is turned upside down with the adjuster at the top. It will probably be real close to the pump outlet but it may fit. If it does I may run it like that.
If it works like that, and you can use it as is, I can have a set laser cut for you.
Mark

please do not go to far out of you way on it. but if it would fit i would have a use for one Thanks