Thanks alot guys, your comments are very much appreciated. it's been almost a month since Dad passed and it seems like it's been a year... We are all okay though, getting back into the van and getting things done.
After doing some looking at my brake line routing I determined they were going to have to move... They were in the way of the coilover spring...
http://images108.fotki.com/v360/phot...MVC012F-vi.jpg
Anywho, I re-routed them to the front side of the housing. I built some new brackets to bolt the clamps to and modified a junction block to mount off to the side of the punkin.
The brackets were pretty simple 7/8th's square pieces of 1/8th plate and the junction block bracket is the same stuff bent into a "U".
http://images60.fotki.com/v361/photo...MVC003F-vi.jpg
The little brackets were drilled and tapped for the 10-24 screws
http://images61.fotki.com/v546/photo...MVC007F-vi.jpg
The saddle bracket for the junction block got clearance holes for the screws. I modified the junction block by drilling and tapping for the screws. This will slip in under the bracket and get bolted in place.
http://images55.fotki.com/v1617/phot...MVC018F-vi.jpg
I welded the brackets to the housing and mocked up the clamps and lines.
http://images54.fotki.com/v77/photos...MVC008F-vi.jpg
With the block screwed in place.
http://images16.fotki.com/v220/photo...MVC014F-vi.jpg
http://images58.fotki.com/v513/photo...MVC017F-vi.jpg
Pics of the clamps mocked up.
http://images49.fotki.com/v1508/phot...MVC011F-vi.jpg
That will get the lines routed safely. I still have to get the FlexKore lines to finish this up.
Thanks for looking
Mark