Got out in the shop Saturday morning and made a couple of new, shorter, plugs. These go pretty well flush with the prop valve now so I know there will be no issues with fitment. These fittings are much nicer.
http://images45.fotki.com/v1636/phot...MVC005F-vi.jpg
They flush up real nice with the prop valve. The plug on the left is off the shelf.
http://images34.fotki.com/v1633/phot...MVC006F-vi.jpg

With that finally done I started laying out parts to get the brake lines ran. This junction block will bolt under the cross member. Drilling a hole for a 1/4-20 rivnut is next.
http://images51.fotki.com/v1638/phot...MVC010F-vi.jpg
http://images52.fotki.com/v1639/phot...MVC014F-vi.jpg
Rivnut installed.
http://images41.fotki.com/v1634/phot...MVC016F-vi.jpg
With the block installed I can start routing lines.
http://images34.fotki.com/v1633/phot...MVC017F-vi.jpg