Didn't get a lot of time out in the shop Sunday but it was enough to get the clips mounted for the Right Front hardline.
I started in the middle of the crossmember. Once this was tightened up I could center the line and determine where to put the end clips.
http://images52.fotki.com/v1639/phot...MVC001S-vi.jpg
I mounted the outer clips so they captured the tangent of the bend radius on each end. This keeps the line from itching around between the clips.
http://images45.fotki.com/v1636/phot...MVC014S-vi.jpg
This is the driver side bolted up.
http://images12.fotki.com/v1641/phot...MVC016S-vi.jpg
And the passenger side. I'll finish routing this end after the brake tabs are welded on.
http://images12.fotki.com/v1641/phot...MVC015S-vi.jpg

Mark