I got around to ordering the springs for the coil overs this week. Got them thru Speedway, they were on sale and, with free shipping, I saved a bit of cash.
http://images59.fotki.com/v1640/phot...MVC025S-vi.jpg
Mocked up on a shock. I also got the Thrust bearings that go between the spring and lower seat.
http://images52.fotki.com/v1639/phot...MVC026S-vi.jpg
Instead of welding on the brake tabs I decided to go with these bolt on guys. I think this will be a lot cleaner on the frame. As you can see I have them bolted down already.
https://images59.fotki.com/v1640/pho...VC011S2-vi.jpg
https://images46.fotki.com/v1637/pho...MVC014S-vi.jpg
I did have an issue with these though. As received the hole for the brake line was to small. I had to drill them out with a 5/8ths bit to get the line to go in.
This was one of the straight tabs I had been using.
https://images45.fotki.com/v1636/pho...MVC020S-vi.jpg
This was the hole size in the new tabs...
https://images12.fotki.com/v1641/pho...MVC019S-vi.jpg
.025 makes a big difference here.
Mark