Been a while since I got any reportable work done on the van. Getting sick for a week put a real crimp on my energy level and I am just now getting back to a feeling good point.
Went out today and finished setting up all of the rear stab bar components. Centered the rear housing in the chassis and got all of the links and brackets mocked up. Marked everything for cleaning up the weld areas of paint and broke out the flap disc grinder.
With everything cleaned up I got the welder fired up and welded on the stab bar towers.
http://images40.fotki.com/v992/photo...MVC011F-vi.jpg
http://images108.fotki.com/v1221/pho...MVC003F-vi.jpg
With those finally in place I set the stab bar back up and got the rear brackets welded on.
http://images46.fotki.com/v1637/phot...MVC005F-vi.jpg
http://images52.fotki.com/v1639/phot...MVC007F-vi.jpg
It all looks good with the links bolted back in.
http://images12.fotki.com/v539/photo...MVC002F-vi.jpg
http://images108.fotki.com/v1221/pho...MVC014F-vi.jpg
I also did some work on the steering wheel adapter for the PCS shifter set up. Got a chunk of 1/2" aluminum cut out and marked to start making it.
Got a lot done today, thanks for watching.
Mark