Got a bit more done over the weekend. Ran the front suspensions thru jounce and rebound and full L/R lock. Laid out the final positions for the steering stops and got those tacked in.
After grinding the paint off I marked the positions with black felt pen.
http://images52.fotki.com/v1639/phot...MVC001F-vi.jpg
Checking the positioning and making sure everything is in the right spot. This is the passenger side as the frame is upside down on the rotisserie.
http://images108.fotki.com/v1221/pho...MVC004F-vi.jpg
This is the driver side front stop tacked on.
http://images46.fotki.com/v1637/phot...MVC010F-vi.jpg
I will pull the spindles out to finish the welding. I had everything wrapped in welding blankets while tacking but I didn't want to put that kind of heat into the blankets.
http://images59.fotki.com/v1640/phot...MVC009F-vi.jpg
I probably should have rounded those corners over before I tacked them on... Oh well the big grinder will get a work out.
Mark