Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
12-10-2006 02:58 PM #1
CHR Member
- Join Date
- Sep 2005
- Location
- fresno
- Car Year, Make, Model: 55 Chevy
- Posts
- 171
Axle ID
Can anyone help me with ID on this axle? It is susposedly from a Chevy van and is now installed on my 55 Chevy project. As installed, the tie rods are behind the axle, and the brake lines are in the front of the backing plates. Also, the steering arm comes off the drivers side in front. This axle may even be on backwards, as that is the way I got it. It has one tie rod between both sides, and another tie rod connected from the right side.
I will need to get a pitman arm, drag link setup for steering. I can use the original 55 Chevy box, but I'd be interested in alternatives. Thanks...
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-10-2006 05:14 PM #2
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
check your kinkgpin inclination angle, it should be about 5 degrees back to give it some caster.... Looks similar to the '58 Chevy pickup frong end I took off.... Still laying here if anyone needs one....Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird