Thread: Confused!!! My right bedside is...

Tweet

1/2 inch lower than the left side. It seems to be the frame that's the trouble not the bed.
I first measured at the top of the tailgate then the end of the frame rails, axles and the bottom of the fuel cell.

It's a TCI spring kit back there. Will I need to shim the right side up or is there something I'm missing?

TILT 1

TILT2.jpg picture by BIGCHEVY3600 - Photobucket

Your pictures show up too small to see any detail (on my computer at least). What type TCI spring are you talking about? On the surface I would think a shim would probably address the problem, but if the springs are balanced you've got to wonder what is different side to side.... Are your mounts all equal? Nothing tweaked?

It's just a leaf kit. I'll go back and make bucu measurements.

wouldn't worry about it.
Most roads are cambered slightly differently, I doubt anyone will ever be able to see the difference.

Back in 85 I bought a chevy P/U new and the frame was bent so one side was lower than the other... I put it a frame shop they took care of the problem.....The dealer was NO HELP they said there was nothing they could do..