11LikesThread: Drive line setup
Results 1 to 15 of 31
LinkBack URL
About LinkBacksHybrid View
-
02-11-2014 09:10 PM #1
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
02-13-2014 10:42 AM #2
CHR Member
- Join Date
- Aug 2010
- Location
- Big Cove
- Car Year, Make, Model: 39 Chevy Sedan
- Posts
- 115
Ok, I got my trans down bout 2.8 deg pinion up 3.0 deg another question my drive shaft at the rear and center is about .014 runout at the trans it hard to tell. My in an out clearance is 1.125 slip but I can take the drive shaft and move it up and down or back an forth till it's plum off the indicator I got + or - .04 on my indicator. I'm sure you should have some but is that normal?
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?