Thread: 85 Camaro Brakes
-
07-11-2004 07:15 PM #1
85 Camaro Brakes
Hi All - Have a 46' ford Hotrod - half done - I purchased it incomplete - it has a 10 bolt 85 Camaro rearend and a mustang two front end w/ a kit crossmember from about 12 yrs ago - has chev rear calipers and ford front calipers- Rotors are 10-1/2 inches - question is? - where do these calipers come from? - from research I have found that neither the 85 Camaro nor the 74-78 Mustang have this large of rotors. I've heard they could possibly be from a Thunderbird of the same year asa the mustang. - Any help would be greatly appreciated - many thanks in advance - keep "RODDIN" -
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-11-2004 07:21 PM #2
Charlyg, I'm not shure on the brakes but, I do know that your Ford is not 46 inches it's a '46.You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
-
07-11-2004 08:03 PM #3
Originally posted by Matt167
Charlyg, I'm not shure on the brakes but, I do know that your Ford is not 46 inches it's a '46."PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
-
07-12-2004 06:28 AM #4
Do they have a GM 5X4.75 bolt pattern? If so they are probably mid-70s Camaro rotors. The calipers are likely '78-85 GM "Metric" calipers.Richard T. Gautier
Gautier, MS
1936 Chevy 2 dr sedan (Turbo Buick Powered!)
Click the WWW button for pics
2003 Chevy Avalanche w/o body hardware (black, of course)
2003 Chevy Trailblazer (also black)
-
07-12-2004 08:05 AM #5
If the fronts are ford bolt paterns, they are off of a Granada, that is the only other ford rotor that fits those spindles. If they are GM, they are probly 82-84 monte carlo rotors becuase they fit those spindles also.
-
07-12-2004 05:50 PM #6
Originally posted by pro70z28
Yabiut' to correct your correction he said 46 feet not 46 inches. Har Har HarYou don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
-
07-12-2004 06:27 PM #7
Thanks all - sorry about the typo - These rotors are all chevy 5bolt/4.50-4.75 inch bolt pattern - could they be from the 85 Camaro Iroc/z? - Thanks - charlyg - they are 10 1/2 INCHES!
-
08-23-2004 07:47 AM #8
the front rotors at 10.5" and 4.5" 5 bolt are stock camaro rotors. I went out and measured those on the 84 V8 (non-z non-rs) camaro.
as for the rears...i know drum is stock on all but a few. i havce hte reference book loaned out right now so i can't look up what year came with disk or what interchanges.Chris
Only the dead fish go with the flow.
Merry Christmas ya'll
Merry Christmas