pr. plate/clutch clearance

**tcodi** · 02-23-2005 02:17 PM

is it that "z bar" thing you guys are talking about?
There is a ball on the outside of my bell, just above the fork, but it is busted off. Is that what you meant.

**lt1s10** · 02-23-2005 02:21 PM

Originally posted by tcodi
is it that "z bar" thing you guys are talking about?
There is a ball on the outside of my bell, just above the fork, but it is busted off. Is that what you meant.

yes and thats the way you need to be going.

**lt1s10** · 02-23-2005 03:05 PM

Originally posted by DennyW
A little more. I'm also trying to find you a picture to see it all. hahaha

thats what you need and then you could do most anything you wanted to.

**lt1s10** · 02-23-2005 03:37 PM

Originally posted by DennyW
A little more. I'm also trying to find you a picture to see it all. hahaha

do you have a boss for that ballstud in your bellhousing tcodi ?

**tcodi** · 02-23-2005 04:11 PM

it's about half there, and half broken off

**lt1s10** · 02-23-2005 04:18 PM

Originally posted by tcodi
it's about half there, and half broken off

is it in your block or bellhousing or can put it in either

**tcodi** · 02-23-2005 04:27 PM

well, mine has the big oil filter opening in the back there, but there is also a threaded hole right at the back on the side, so I guess that's it.

**lt1s10** · 02-23-2005 04:33 PM

Originally posted by DennyW
Well, don't know about the aluminum mounting. I wouldn't want to have my truck clutch pivot mounted there. All the gm's and fords I worked on had the ball in the block. Maybe the newer ones don't need that. Got me.
Heres a picture of a gm block showing the ball location. Someone had stuck a bolt on there because they got tocheap to buy a 17.00 ball.

about the same place as the pic. then thats where the ball goes and to do this right you need to use the z bar . if not you gonna have a problem.

**tcodi** · 02-23-2005 04:41 PM

yep

**tcodi** · 02-23-2005 04:43 PM

other view

**lt1s10** · 02-23-2005 05:29 PM

to do it right tcodi thats the way it need to be done, then you want have to worry about it any more. you can try it the other way but its cant stay on the ball like that i work at the school bus shop 5 yrs saw a lot of clutches go bad.

**tcodi** · 02-23-2005 05:33 PM

I'll do it that way
thanks guys

**lt1s10** · 02-23-2005 05:37 PM

Originally posted by tcodi
I'll do it that way
thanks guys

you'll be glade you did.

**tcodi** · 02-24-2005 10:43 AM

where the heck can you get those ball studs or z bar parts.
AutoZone, Advance Auto and NAPA don't stock that stuff.

**tcodi** · 02-24-2005 12:22 PM

I was planning on making my own z bar with some tubing and such. It's just the ball stud I wanted to buy. I guess I could just make one with a threaded ball and piece of all thread.

Thread: pr. plate/clutch clearance

       Tweet

LinkBack

Thread Tools

Display

Posting Permissions

the Official CHR joke page duel

Another little bird

Stude M5 build

Another one bites the dust

Stude M5 build