Thread: Transmission swap
Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
08-11-2005 06:13 AM #1
CHR Member
- Join Date
- Mar 2005
- Location
- Burleson
- Car Year, Make, Model: 30 Tudor
- Posts
- 20
Transmission swap
I'm planning to replace a TM400 with a 700R4 in a 78 Chev P/U. Will the existing drive shaft work?
Any info would be greatly appreciated.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-11-2005 08:26 AM #2
CHR Member
- Join Date
- Dec 2003
- Location
- Pahrump
- Car Year, Make, Model: 1947 International Pick Up
- Posts
- 3,188
I think it depends on the length of the tail shaft on the new trany, and you will probably have to switch the yoke for the new trany on the old drive line if it's the right length.
~ Vegas ~
-
08-11-2005 08:38 AM #3
CHR Member
- Join Date
- Feb 2004
- Location
- Tucson
- Car Year, Make, Model: 39 Ford Coupe, 32 Ford Roadster
- Posts
- 2,334
http://www.tciauto.com/tech_info/trans_dims.htm
found by using google.com
-
08-12-2005 10:48 AM #4
CHR Member
- Join Date
- Mar 2005
- Location
- Burleson
- Car Year, Make, Model: 30 Tudor
- Posts
- 20
Thanks guys - good info!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
You're welcome Mike, glad it worked out for you. Roger, it's taken a few years but my inventory of excess parts has shrunk a fair bit from 1 1/2 garage stalls to about an eight by eight space. ...
1968 Plymouth Valiant 1st Gen HEMI