Thread: HELP s10 LT1 swap tranny problem

Tweet

Originally posted by foofer1986
did you use the computer from the lt1 and the one from the truck or just the one from the lt1 cuz i read i didnt need both cuz the truck never had the underhood one that rests on the coolant resevior. did you buy an after marreket wiring kit or rig it up and what did you do about the abs but i dont have cc so i dont have to worry about that

I cut all the wires that went to the stock comp. threw them in the trash. with the 95 body it will be easier to do that, because more stuff goes through the comp. in the 97. other than the wiring its really no big deal. if you can afford new wires get them. you also need to get you a book on this, because it a lot of little things you gonna wish you had of known about. Ill get you some info on that later, because I don't have it right now. you gonna need somebody to reprogram your comp. and get the burglar alarm eliminated and if you use the 700r4 then he can change the shift points. Ill get you some more info. later. the ABS is not tied into the motor comp.