Thread: need help

Tweet

hello
well im new got a350 that leaking out the frount seal
put new seal still leaking
2nd new still leaking it does not leak untill 5 miles down road
ckecked lines,new filter could it be torque converter
thanks for any help

tranmission
no did not replace bus

thanks
it in a 86 chev s10 had to cut floor board out to change.
changes out strong good hard shifts
you said babbit to copper
new at pumps.please explane

thanks for your inf.
it was a lot of help

... Iwould also have a good look at the tq converter... I had similar symptom with leak after a few miles usually on a 1-2 shift with load. Turned out the torque converter snout was slightly cracked...

Just a thought,

-Chris

never changed pump in 350 .changed in small ford.
started to check pump cover to see if pressure valve.
took bolts out but could not get cover off .i havechiltons automatic trans
guide but dont really show that much.
this d n thing is really got my goat.

i know ive ask a lot of quiston
if you would what is the correct way to pull pump 350th
thanks lonewo1fe