Thread: turbo 400 yoke
Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
11-13-2009 10:04 AM #1
CHR Member
- Join Date
- Sep 2008
- Location
- skickshinny
- Posts
- 16
turbo 400 yoke
I know this question has probably been asked a 100 times before but I couldn't find a search for this site. I'm have a turbo 400 with a fixed yoke, can I take the bolt out and use it as a slip yoke with a one piece drive shaft? How long can you make a drive shaft before you need to split it?Thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-13-2009 01:31 PM #2
Banned
- Join Date
- Aug 2008
- Location
- Gulfcoast Salvage 34224
- Car Year, Make, Model: The thing in the avatar
- Posts
- 517
Yoke drive 400
I don't think you can do that but I wouldn't bet my life on it....I remember when hot rods were all home made.
-
11-14-2009 11:31 AM #3
CHR Member
- Join Date
- Dec 2008
- Location
- FRAMINGHAM
- Car Year, Make, Model: 28 FORD PICKUP, 1968 Z-28 roadrace car,
- Posts
- 85
Hi,
The bolt in yoke has no plug in the rear nearest the u-joint. The bolt in yoke will leak lots of oil. I sell the correct T-400 yoke if you still need it. What u-joint size do you have.Mike Forte
Forte's Parts Connection
40 Pearl St
Framingham, Ma 01702
mike@fortesparts.com
fortesparts.com
Tremec Elite Distributor of T-5, T-56, T-56 Magnum, TKO-500 & TKO-600
30th year in business
-
11-16-2009 08:11 AM #4
CHR Member
- Join Date
- Sep 2008
- Location
- skickshinny
- Posts
- 16
I'll have to measure it or is there some other way to tell what size it is? Thanks
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Yep. And I seem to move 1 thing and it displaces something else with 1/2 of that landing on the workbench and then I forgot where I was going with this other thing and I'll see something else that...
1968 Plymouth Valiant 1st Gen HEMI