Thread: Ford c6-aod conversion
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
07-15-2010 02:58 PM #1
CHR Member
- Join Date
- Oct 2007
- Location
- ames
- Car Year, Make, Model: 69 merc monterey 2dr sports coupe specia
- Posts
- 63
Ford c6-aod conversion
Well I ditched the c6 and have the aod in my monterey. Only issue is that the universal joints that work on the drive shaft are too long for the aod slip yolk. Is there an easy way to work around this? I thought about grinding a little bit off each end of the universal joint but wasn't sure if that was a safe idea."Caffeine is the glue that holds my macaroni picture together, nicotine is the magnet that holds it all up on the fridge."
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-15-2010 03:53 PM #2
CHR Member/Contributor
- Join Date
- Feb 2009
- Location
- McKinleyville
- Car Year, Make, Model: 27 Ford Roadster
- Posts
- 198
Do not grind. speedway motors has conversion u-joints that will work
-
07-15-2010 11:39 PM #3
CHR Member
- Join Date
- Jun 2007
- Location
- Phoenix
- Car Year, Make, Model: 1954 Ford Customline 5.0 & AOD
- Posts
- 443
Look up drive shafts in your local yellow pages take the drive shaft and yoke with you,most stock conversion joints by NEAPCO.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Great to see your new post, Mike, and great to see CHR up and running again after several days of the Hmmm, can't reach this page.... Also good that you found an easy solution to your storage/access...
1968 Plymouth Valiant 1st Gen HEMI