Thread: T-10 I.D. help

Tweet

Recieved a Borg Warner 4 speed and need help on I.D. searched the net and came up empty.
10 spline input with 5 grooves. I did find the 5 grooves indicate 3:42 ratio
28 spline output.
case has T10P-1B, W.G. Div, B.15.73
tail case has T10P-7A, Q1, B.12.73 also see a Q 1
side cover has 13-04-097-901 with an O 2 above that
found a number stamped on main case D1732
Main case,side cover and tail shaft housing are cast iron.
There is an aluminum spacer plate between main case and tail case.
Any help is greatly appreciated. Thanks

Originally Posted by HWORRELL

Recieved a Borg Warner 4 speed and need help on I.D. searched the net and came up empty.
10 spline input with 5 grooves. I did find the 5 grooves indicate 3:42 ratio
28 spline output.
case has T10P-1B, W.G. Div, B.15.73
tail case has T10P-7A, Q1, B.12.73 also see a Q 1
side cover has 13-04-097-901 with an O 2 above that
found a number stamped on main case D1732
Main case,side cover and tail shaft housing are cast iron.
There is an aluminum spacer plate between main case and tail case.
Any help is greatly appreciated. Thanks

Maybe this will help.....Borg Warner Second Design ST